Protokol Manual
Interface · OSC Tab
With the OSC tab currently active, four functions become available:
Enabled
Activate (or deactivate) the OSC Log. By default logging is deactivated.
Port
Set the port number for Protokol's built-in OSC Host. Refer to the TouchOSC setup example here for more detail.
Options
Configure what information is captured and displayed in the log.
Display
Displays additional information alongside the log data.
- Timestamp – local computer time, accurate to the nearest millisecond
Events
Configure the log to show / hide certain events.
- Send – feature currently not available
- Receive – incoming OSC messages
- Connect – OSC port(s) connected to Protokol
- Disconnect – OSC port(s) disconnected from Protokol
Clear
Clears all log data from the screen and application memory. Clearing can be done at any time.